ftimescan
Description:
Continuous scan in time.
When using one lima device, TIME and CAMERA scanning modes are supported, including lima accumulation mode. See scanning mode details.
Parameters:
parameter | description | |
---|---|---|
acq_time | [sec] | acquistion time per point. |
npoints | number of acquired points | |
period | [sec] | period between two start triggers. If set to 0, final detector readout time is estimated to compute period. |
start_delay | [sec] | time delay of first trigger. It is needed for some detectors which have a delay to react to triggers when they start. |
scan_mode | TIME,CAMERA | CAMERA mode can be used when one lima detector is used. |
camera_signal | EDGE,LEVEL | define camera input signal type when using CAMERA mode. |
latency_time | [sec] | additionnal latency time added to detector readout time. |
Common parameters implemented : save_flag, display_flag, sampling_time.