IDS 3010 Attocube Interfermeter¶
Note
To use IDS3010, the conda package attocube_ids (available on esrf-bcu conda
channel) has to be installed.
conda install attocube_ids -c esrf-bcu
- name: ids
plugin: generic
module: interferometers.attocube_ids.ids3010
class: Ids3010
host: attopamu42.esrf.fr
Online info example:
DEMO [2]: ids
Out [2]: ids IDS3010
Mode: measurement running
Firmware Version: 1.7.0
IP address: 172.24.165.249
MAC address: 70:B3:D5:D7:60:D8
--------------- ------------ ------------ ------------
AXES: axis1 axis2 axis3
ABS POS: 317284413666 317246704004 317563060257
DISPLACEMENTS: -500759 -484069 -589780
CONTRAST: 836 772 0
BASELINE: 0 0 0
--------------- ------------ ------------ ------------
usage example¶
DEMO [4]: ids
Out [4]: IDS3010 : ids
host: attopamu42.esrf.fr
Mode: measurement running
Firmware Version: 1.7.9
IP address: 172.24.165.249
MAC address: 70:B3:D5:D7:60:D8
--------------- ------------------ ------------------ ------------------
AXES: axis1 axis2 axis3
ABS POS: 315,273,622,408 pm 315,320,782,246 pm 315,600,770,981 pm
DISPLACEMENTS: -331302 -311589 -274324
CONTRAST: nan nan nan
BASELINE: nan nan nan
--------------- ------------------ ------------------ ------------------
DEMO [6]: ids._set_optic_alignement_mode()
stopping measurement mode
wait for idle
.
idle
starting optics alignment mode
....
Alignment mode started in 2 seconds
DEMO [7]: ids
Out [7]: IDS3010 : ids
host: attopamu42.esrf.fr
Mode: optics alignment running
Firmware Version: 1.7.9
IP address: 172.24.165.249
MAC address: 70:B3:D5:D7:60:D8
--------- ----- ----- -----
AXES: axis1 axis2 axis3
CONTRAST: 774 637 nan
BASELINE: 0 54 nan
--------- ----- ----- -----
DEMO [9]: ct(1, ids)
Fri Nov 19 14:17:31 2021: Scan(name=ct, path='not saved')
d1 = nan ( nan /s) ids
d2 = nan ( nan /s) ids
d3 = nan ( nan /s) ids
c1 = 760.000 ( 760.000 /s) ids
c2 = 626.000 ( 626.000 /s) ids
c3 = nan ( nan /s) ids
Took 0:00:01.044249[s]
Out [9]: Scan(name=ct, path='not saved')
DEMO [11]: ct(1, ids.counters.c1)
Fri Nov 19 14:17:41 2021: Scan(name=ct, path='not saved')
c1 = 783.000 ( 783.000 /s) ids
Took 0:00:01.024787[s]
Out [11]: Scan(name=ct, path='not saved')
DEMO [12]: ids._set_measurement_mode()
stoping alignment mode
wait for idle
....
idle
starting measurement mode (~30s)
..........................
Alignment mode started in 26 seconds
DEMO [13]: ct(1, ids)
Fri Nov 19 14:21:34 2021: Scan(name=ct, path='not saved')
d1 = -336815. ( -336815. /s) ids
d2 = -306352. ( -306352. /s) ids
d3 = -307347. ( -307347. /s) ids
c1 = nan ( nan /s) ids
c2 = nan ( nan /s) ids
c3 = nan ( nan /s) ids
Took 0:00:01.086622[s]
Out [13]: Scan(name=ct, path='not saved')