Skip to content

Writing a shutter controller

All new shutter object should inherited from Shutter class located under bliss/common/shutter.py.

Methods to over-load are:

  • _init(self): software initialization (i.e. communication, internal state…)
  • _initialize_hardware(self): initializes hardware parameters. It is called only once and only by the first client. The minimum to do in this method is to go back to the previous mode if it has a meaning for your shutter.
  • _set_mode(self, mode): changes the opening/closing mode. Modes are:
    • EXTERNAL: externally controlled (i.e. with a TTl signal)
    • MANUAL: equals to software which means that the opening/closing are done with open() and close() methods.
    • CONFIGURATION: mode to tune the shutter (i.e. in case of axis shutter), this mode should be use to calibrate the opening and closing position.

Note

Leave this _set_mode method unimplemented if mode means nothing for your shutter.

  • _state(self): returns the current state of the shutter
    • Either self.OPEN, self.CLOSED or self.UNKNOWN
  • _open(self): to open the shutter
  • _close(self): to close the shutter
  • _measure_open_close_time(self) (optional): to return the opening plus the closing time for a shutter